The Arrow Post Kit is a bold, eye-catching way to maximize the visibility of your signage. Designed to hold two single-sided signs in a V-formation at a 90-degree angle, this kit dramatically improves your chances of attracting attention from passersby—perfect for roadside advertising or busy intersections.
FAQ's
How tall is the Arrow Post Kit when installed?
Each kit includes 8-foot vertical PVC posts. For stability, we recommend installing them in holes approximately 24" deep, resulting in a final installed height of around 6 feet.
Is the Arrow Post Kit weather-resistant?
Absolutely! We’re based in Fort Lauderdale, Florida, so we know all about tough weather. This kit is built to withstand winds up to 55 mph and is fully resistant to rain and rust.
Can I order a custom size?
Yes! We offer custom sizes upon request. Just give us a call at 1-800-843-7446 or email mail@1800thesign.com to get started.
Post Kit Features
• Heavy-Duty PVC Posts
Engineered to resist rust, rot, and weather-related wear.
• Cap Style Options
Flat caps are included by default. Upgrade to Gothic Caps for a more decorative finish.
• Complete Hardware Kit
All necessary mounting hardware is included (except a screwdriver and a shovel).
Need a Sign?
Looking to pair your post kit with a custom sign? It’s simple. Visit the “4’x4’ Signs” section on our website and choose your preferred design method:
1. Upload Your Own Artwork
Upload your file directly in one of the supported formats: PDF, EPS, AI, TIF, JPG, or PNG. If the resolution needs adjustment, our design team will contact you.
2. Use the EZ Design Tool
Want to DIY? Use our intuitive design tool to create a sign from scratch or start with one of our professional templates.
3. Need Help with Design?
Our in-house design team is ready to assist. Reach out at 1-800-843-7446 or mail@1800thesign.com, Monday through Friday, 9 AM–6 PM EST.
Post Kit Maintenance
To keep your Arrow Post Kit looking its best:
• Routine Cleaning – Use mild soap, warm water, and a soft sponge. Avoid abrasive scrubbers.
• Spot Cleaning – Windex or Lysol spray is safe for cleaning tougher spots.
• Rinsing – Hose it down as needed. The PVC won't rust.
• Drying – Let it air dry or wipe with a soft cloth or paper towel.
Installation
Follow these steps for a smooth installation:
1. Attach Tracks to Sign Faces: Slide horizontal tracks onto both signs, aligning with the edges. Secure with small screws in the pre-drilled holes.
2. Install Starter Arrows: On one sign face, place two starter arrows on each edge—about 16” apart and centered.
3. Set Up Center Post: Lay the larger vertical post on the ground with the routed side facing up—this will serve as the center post.
4. Insert Sign into Center Post: Lift the sign and carefully slide it into the routed groove on the center post until it hits the stopper. A slight angle may help.
5. Secure Sign to Post: Use large screws to fasten the sign and tracks to the post using the pre-drilled holes.
6. Connect to Side Post: Lift the assembly and insert the other side of the sign into a smaller vertical post, using the same method.
7. Add Second Sign: Insert the second sign into the routed slot of the center post, making sure it faces away from the other sign. Secure with large screws.
8. Fasten Rear Screws: Install large screws into the pre-drilled holes on the back side of the center post for added stability.
9. Install in Ground: Dig three holes approximately 18–24" deep using the sign as a spacing guide. Place the assembled kit into the holes, ensure it's level, then fill and compact the soil tightly.
