Our Arrow Post Kit is a great way to draw attention to your advertisement. This striking set of posts holds 2 single sided signs in a V shape at a 90 degree angle, drastically increasing your chances of being seen by potential clients!
FAQ's
"How tall is the Arrow Post Kit when installed?"
This Post Kit comes with 8’ vertical PVC Posts, and we recommend you install them in holes about 24” deep for structural stability, so the whole thing stands about 6’ tall when fully installed.
"Will the Arrow Post Kit stand up to weather?"
Our headquarters is in Ft. Lauderdale, Florida, so we know a thing or two about rough weather. Thankfully, this Post Kit is rated to withstand up to 55mph winds without failing! It’s also rain resistant and rust resistant.
"Do you make your Arrow Post Kits in custom sizes?"
We sure do! Just call us at 1-800-843-7446 or email us at mail@1800thesign.com for more information!
Post Kit Features
• Durable PVC Posts
Weather-resistant and built to last, these posts won’t rust or rot.
• Cap Options
Each kit comes with flat caps by default. Want something more stylish? Upgrade to Gothic Caps for an elegant touch.
• All Necessary Hardware Included
Everything you need is in the box, minus a screwdriver and a shovel.
Need a Sign?
Want a custom sign to go with your post kit? We’ve made it easy. Head to the “4’x8’ Signs” section in our menu and choose from three convenient design methods:
1. Upload Your Artwork
Already have your design ready? Simply upload your artwork (PDF, EPS, AI, TIF, JPG, PNG). If it needs adjustments for print quality, our design team will reach out.
2. Use Our EZ Design Tool
Prefer to design it yourself? Use our intuitive design tool to create your sign from scratch or customize one of our professional templates.
3. Need Design Assistance?
We’re here to help. Call us at 1-800-843-7446 or email mail@1800thesign.com. Our in-house design team is available Monday–Friday, 9 AM to 6 PM EST.
Post Kit Maintenance
While built to endure the elements, your post kit will stay looking new with a little routine care:
• General Cleaning – Use warm, soapy water and a soft sponge. Avoid abrasive cleaners.
• Spot Cleaning – Tougher spots? Windex or Lysol spray is safe for PVC.
• Rinse – Feel free to hose it down; the PVC won’t rust.
• Drying – Air dry or wipe with a soft towel.
Installation
Here are the steps involved to successfully install our Arrow Post Kit:
Step 1: Slide the horizontal tracks onto both sign faces so that they are even with the edges of the sign. Screw the small screws into the pre-drilled holes.
Step 2: Place 2 starter arrows on each edge of one sign, approximately 16” apart, centered.
Step 3: Place the larger vertical post on the ground, with the routed side facing up. This is the center post.
Step 4: Lift the sign, with the sign face on the outside, into the routed groove until it hits the stopper.This may be easier at a slight angle.
Step 5: Screw the sign and tracks into place with the large screws into the pre-drilled holes on the front side of the post.
Step 6: Lift the sign and the attached post to insert the other side of the sign into a smaller post, using the same method as step 4
Step 7: Using the same method as before, insert the other sign in the routed sign slot, making sure it is facing away from the routed side. Screw the sign and tracks into place with the large screws into the pre-drilled holes.
Step 8: Install the large screws into the pre-drilled holes on the back of the center post.
Step 9: Using the sign as a spacing guide, dig (3) holes 18-24 inches deep. Place the assembled sign into the holes, ensure it is level, and re-fill the holes, packing the dirt or soil tightly.
