Patent # US 8,984,783B2
Contents: (4) 4' Metal Posts
(1) PVC Guide (2) Starter Arrows
Note: 3 Piece set for Tall Boys
comes with 1 Base post and 2 Top posts.
Step 1 - Locate the PVC Guide and 1 Metal Post. Hold the Metal Base Post upright with the wide end up and insert the short end of PVC Guide into the top of the Post.
Step 2 - Locate 1 Metal Top Post. Flip so the wide end is down and slide it over the PVC Guide until it hits the Base Post. Continue to slide the Top Post up and down as many times as it takes to pound the Base Post in securely, approximately 18”. Remove the Top Post and PVC Guide. Repeat steps 1 & 2 with the other Base Post.
Step 3 - Locate the 2 Top Posts and slide the Starter Arrows into the wide ends. Using the arrows, slide the Top Posts into the center of the Post Pockets™ in the sign, approx 6 flutes in from edge, until they are completely inserted. Note: approx. 8” of post will still be visible.
Step 4 - Simply grab the sign with the Top Posts inserted and slide over the Base Posts.
Warning: Wear safety equipment including leather gloves and eye protection. Due care should be taken to avoid blocking visibility, pathways etc. Consult the proper authorities prior to installing the sign to insure there are no underground hazards, obstacles, utilities, pipes, etc.. There may be local regulations regarding the use of these signs.
