The Rider Sign material is approx. ½” thick, rigid signboard. The Rider comes with chains to hang from the bottom track of the post kit. Simply unscrew the two screws from the bottom track of the post kit, slide the chains onto the screws then re-screw them in to the tracks..
The Rider Sign material is approx. ½" thick, rigid signboard. It can be used above the sign using the top rider holder. It can also be used below signs 2x4 or smaller when using a skirt stand by adding the rider onto the stand before the sign.
The rider holder can be inserted into the top of the corrugated flutes on 10 mm signs 32"x48" or smaller. The 6"x24" rider is then placed on top rider holder and slide into place.
